Bambu PLA Metal
Bambu PLA Metal is a metallic textured filament designed to enhance the aesthetic of your prints. It is designed to mimic the surface texture of metal, but it does not contain actual metal fillers.
With its advanced metallic shine, this filament offers a professional and high-end finish and a touch of sophistication to your prints while retaining almost the same comprehensive performance of regular PLA.
Accessory Compatibility
| Recommended | Not Recommended |
| Build Plate | Cool Plate SuperTack, Smooth PEI Plate, Textured PEI Plate | / |
| Hotend | All Size / Material | / |
| Glue | Bambu Liquid Glue
Glue Stick | / |
PLA Metal Hex Code Table
| Color | Hex Code | Display |
| Iridium Gold Metallic | #B39B84 |
|
| Copper Brown Metallic | #AA6443 |
|
| Oxide Green Metallic | #1D7C6A |
|
| Cobalt Blue Metallic | #39699E |
|
| Iron Gray Metallic | #43403D |
|
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
| Recommended Printing Settings |
| Drying Settings (Blast Drying Oven) | 55 °C, 8 h |
| Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 190 - 230 °C |
| Bed Temperature (with Glue) | 35 - 45 °C |
| Printing Speed | < 300 mm/s |
| Physical Properties |
|
| Density | 1.25 g/cm³ |
| Vicat Softening Temperature | 62 °C |
| Heat Deflection Temperature | 62 °C |
| Melting Temperature | 160 °C |
| Melt Index | 38.6 ± 3.7 g/10 min |
| Mechanical Properties |
|
| Tensile Strength | 34 ± 4 MPa |
| Breaking Elongation Rate | 14.7 ± 1.5 % |
| Bending Modulus | 2290 ± 210 MPa |
| Bending Strength | 66 ± 3 MPa |
| Impact Strength | 58.9 ± 3.4 kJ/m² |
Downloads
Filament TDS
Filament MSDS
Filament RoHS
Printing Tips
• Drying conditions: 55℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.
What's in the Box
Filament*1 & Desiccant*1
Package*1
